Breakfast cabinet SET Corner LED-CORNER 4,3m with door sensor | 4000K, IP44, Ra>85, white

Reference: 96303
Supplier reference:
Breakfast cabinet SET Corner 4,3m

354,64 €(286,00 € tax excl)

Product variations: Availability Add to brochure:
Breakfast cabinet SET Corner In stock MyLimente

Versatile corner profile with door sensor to breakfast cabinet

LIMENTE LED-CORNER IP44 is a versatile light fixture suitable for either working light or mood light. The fixture can be used in breakfast cabinets, where the fixture can be placed on the leading edge. The light is stylish and continuous with no connection points interrupting the light, which provides even light throughout the area.


The fixture can be shortened to a desired length at 3,3 cm intervals. LIMENTE LED-CORNER IP44 comes with quality LEDs with a color rendering index of Ra> 85, an efficiency of 80 lm/W, a luminosity of 1080lm/m and a color temperature of about 4000K (small color temperature differences may vary by production batches). The fixture includes a matte protective glass diffuser, which makes the light even and continuous and makes the light a bit warmer in light color. All technical values are given to the led strip without a diffuser.

LIMENTE 100-series is designed to automate lighting control in all home spaces. Automated control of lighting is at its best when the lights are on when they are needed and where they are needed without the user needing to pay much attention. Unnecessary use of lights and electricity consumption are reduced as security increases. Automatic lighting control makes your breakfast cabinet lighting a new kind of comfort and safety product, and at the same time it is also an ecological way to use lights.

Lighting control

LIMENTE SMART 120 works as an automated ON/OFF –switch.


The Smart 120 door switch is installed near either a sliding or swinging door and whenever the door is opened, the lights inside of the cabinet light up. The detectors can be up to four pieces in one system.

Easy Installation

LIMENTE LED-CORNER IP44 is fast and easy to install with the installation accessories included.


The power supply cable is put in place (e.g. hidden behind a cabinet) so that the male connector comes close to the power supply and the female connector comes near the LED-CORNER profile. A power supply cable at both ends of the fixture enables LED-CORNER IP44 to be used as two separate lights. The fixture can be shortened to a desired length at 3,3 cm intervals. There is a 5cm + 300cm long power cord at each end of the fixture. An extension cord (3m, no. 681588) can be ordered, in case a longer power cord is needed. Extension cords can be fitted with a maximum on 1 pcs of fixtures, with a maximum cord length of up to 6m. Please note the adequate length of the cord and the maximum load (W) of the power supply.

LED-CORNER IP44 can also be used in its full length (2 or 4 m). When wanting to use the whole length, simply cut off the power supply cable at the other end.

When installing, cut the profile into the desired length and attach in place with the installation tools and clips included. Remove the double-sided tape from the light strip and press onto the profile. Finally, connect the power supply cable to the light strip and to the power supply. All electrical connections are done with quick connectors.

The LIMENTE SMART 100-series electronic unit and sensor are simple and quick to install and do not require separate electrical installations. The small electronic unit has female and male plug connectors. The male plug is pressed into the socket and the power supply of the controlled lights is connected to the female plug. You can also do the installation yourself.

The detector is placed behind the door so that when it is opened the door will be removed from the front of the detector. An electronic unit is connected to a manifold with a maximum of 4 sensors. All connections are made using quick connectors.

Package contents

- 2 x 2,15m aluminumprofile white
- 4m ledstrip
- 2 x cord 3m
- driver 60W
- 2 x Smart 120 door sensor

Technical data

EAN-code:
6438400004498
Material
Auminium
Fixture color
White
Light source
LED
Led / m
180
Installation method
Surface mounting
Light flux
1080 lm/m
Efficiency
95 lm/W
CRI value
> 85
Input power
45 W
Lifetime
35.000h (L80B10)
Enclosure class
IP44
Voltage
24 V DC
Warranty months
24
Additional warranty months
12