LIMENTE LED-FLAT 12 LUX white/black | 300 lm, Ra>90

Minimal and thin spotlight

LIMENTE LED-FLAT LUX is a slim spot light with an ultra-thin body (only 8.5 mm) that makes the result look stylish easily. When installed on the underside of a cabinet or shelf, LIMENTE LED-FLAT LUX spotlights look like recessed lights. LIMENTE LED-FLAT LUX is easy and quick to install and the light comes from a wide area while being pleasantly even. There are no unpleasant shadows and dark spots on the surface to be illuminated, as may happen with traditional point lights. LIMENTE LED-FLAT LUX includes both white and black frames so you can choose to use the one you like most.

LIMENTE LED-FLAT LUX lights are suitable for both homes and public spaces where even, modern LED lighting is desired. Both have very good light output and work excellently as both work and mood lights.

Dimming and lighting control

Suitable lighting for any occasion is made easy with our dimming and lighting control system. You can easily change the lighting and ambience in your home from efficient and bright to dim and cozy by dimming your LIMENTE LED-PROFIL LUX with our wireless system. You can use the same switch to adjust all the LIMENTE lights in the room, including various ceiling, panel and profile lights. The light adjusts smoothly at the same time while creating ambience for working, entertaining or any mood in between.

LIMENTE LED-PROFIL LUX is dimmable either with LIMENTE SMART 350 dimmer (no. 640351) and a wireless wall switch (no. 640352) or with LIMENTE SMART 400 24V dimmer (no. 640420) and wireless wall switches (no. 640411, 640421 and 640422, 640424, 640425). LIMENTE SMART 425 is a remote control, which you can use to adjust lighting in your home but also to save two different preset lighting settings to change the mood with just a click of a button!
The dimmer is installed between the power supply and the fixture. The dimmer includes a similar manifold to the one included in the power supply. You can connect up to 6 LIMENTE lights to one dimmer, as long as the maximum load (W) of the power supply is not exceeded.

Installation

LIMENTE LED-FLAT 12 LUX is simple and quick to install on the desired surface. The spotlight is attached to the bottom of the furniture using small screws that come with the lamp, after which the frame is refitted.

The installation of the LIMENTE LED-FLAT 12 LUX luminaire is quick and easy. The power supply cable (hidden behind the cabinet, for example) is laid in place so that one end comes close to the power supply and the other close to the LED-FLAT 12 LUX lamp. The lamps can be installed at intervals of up to 40-60 cm, which allows them to be placed on both sides of the cooker hood so that there is also good lighting on the hob.
The LED-FLAT 12 has an integrated 3 m cable as standard. If this is not enough, you can order an extension cable (3 m) with article number 681588. Extension cables can be connected for max. 1 pc / lamp cable, with a maximum cable length of up to 6 meters. However, remember to take into account the adequacy of the length of the luminaire cables and the fact that the maximum load (W) of the power supply is not exceeded.
All electrical connections are made simply with plug & socket connectors, so you can also do the installations yourself.