Our webshop uses cookies and other technologies so that we can improve your experience on our sites.

LIMENTE LED-LENO 51 stainless steel | 330 lm, Ra>80

Reference: LEDLENO51
Supplier reference:
LIMENTE LED-LENO 51

A modern furniture light fixture

LIMENTE LED-LENO 51 is a beautiful, traditional light fixture with a modern design. The light is wide-spread and pleasant, which makes LED-LENO 51 an excellent choice for a kitchen workspace, in showcases and on shelves. The stainless-steel finish makes LED-LENO 51 a modern, timeless choice. LIMENTE LED-LENO 51 can be installed either recessed or surface-mounted. The high-quality, metallic fixture is also available in white (LED-LENO 52).


All LIMENTE LED-LENO fixtures use a new technique, which makes the light provided even and excellent in color temperature. This generates optimal light and is easy and pleasant on the eyes. Due to their amazing luminosity, the fixtures can be placed up to 60-80cm apart! When the fixtures are placed on both sides of the cooker hood, you are able to receive excellent lighting to your cooktop.

Dimming and lighting control

Appropriate lighting for any occasion is made easy with our dimming and lighting control system. You can easily change the lighting and ambience in your home from efficient and bright to dim and cosy by dimming your LIMENTE LED-LENO 51 with our wireless system. You can use the same switch to adjust all the LIMENTE lights in the room, including various ceiling, panel and profile lights. The light adjusts smoothly at the same time while creating ambience for working, entertaining or any mood in between.


LIMENTE LED-LENO 51 is dimmable either with LIMENTE SMART 350 dimmer (no. 640351) and a wireless wall switch (no. 640352) or with LIMENTE SMART 400 24V dimmer (no. 640420) and wireless wall switches (no. 640411, 640421 and 640422, 640424, 640425). LIMENTE SMART 425 is a remote control, which you can use to adjust lighting in your home but also to save two different preset lighting settings to change the mood with just a click of a button!

The dimmer is installed between the power supply and the fixture. The dimmer includes a similar manifold to the one included in the power supply. You can connect up to 6 LIMENTE lights to one dimmer, as long as the maximum load (W) of the power supply is not exceeded.

Installation

LIMENTE LED-LENO 51 is quick and easy to install. You can either install the fixture recessed or surface-mounted.


When installing the fixture recessed, make a hole in the piece of furniture in which the fixture is installed. Press the fixture into the hole to which the fixture attaches itself with springs in the fixture’s body. When installed surface-mounted, use the installation loop included in delivery. Attach the loop into the chosen place and press the fixture into the loop. The fixture attaches itself with springs in the fixture’s body.

The power supply cable is put in place (e.g. hidden behind a cabinet) so that the male connector comes close to the power supply and the female connector comes near the LED-LENO 51 fixture. The fixtures can be installed up to 60-80cm apart.

There is a 5cm + 300cm long power cord at the end of LED-LENO 51. An extension cord (3m, no. 681588) can be ordered, in case a longer power cord is needed. Extension cords can be fitted with a maximum on 1 pcs of fixtures, with a maximum cord length of up to 6m. Please note the adequate length of the cord and the maximum load (W) of the power supply.

All electrical connections are done with quick connectors.

Technical data

Fixture color/finish
Stainless steel
Installation method
Pinta/uppoasennus
Recommended installation distance
60 - 80 cm
Light flux
330 lm
Efficiency
79 lm/W
Color temperature
4000 K
Ra value
> 85
Lifetime
35.000 h ( L80B10 )
Enclosure class
IP44
Energy class
A+

See also these compatible sockets