Recessed LED-profile light
LIMENTE LED INSER LUX is part of the LIMENTE LUX collection. It is an aluminum profile lamp designed to be recessed in furniture. The profile is submerged to the furniture level and only a sleek thin edge of the profile is visible. LIMENTE LED-INSER LUX is a versatile work- and mood light that can be used not only as a kitchen lighting, but also on shelfs and other surfaces, where light is needed. The LED-INSER LUX is only 8.5 mm deep allowing installation on a sheeted wall without a need to change the wall support structures. LIMENTE LED-INSER LUX is available in standard lengths of 2 m and 4 m (2 m + 2 m) and can be shortened to the desired length at 3.3 cm intervals.
The LIMENTE LUX -series lamps have excellent efficiency (up to 115 lm / w) and their color rendering is perfect. High quality LEDs with a color rendering index of Ra> 95, an efficiency of 93 to 115 lm / W, a light output of 1300 lm / m and a color temperature of 3000 K or 4000 K are used as standard in the LUX-series. Due to the excellent technical values, the LUX models emphasize the true colors of the illuminated item in the best possible way and they are granted with a 3-year warranty. NOTE! The power supply must be ordered separately.
Dimming and lighting control
By adjusting the lights, it is easy to create appropriate lighting for different occasions. By dimming LIMENTE LED-INSER LUX you can change your home’s lighting from efficient and bright to dim and cosy. You can use the same switch to adjust all the LIMENTE lights in the room, including various ceiling-, panel- and profile lights. The lamps adjust smoothly at the same time, while simultaneously changing the ambience of the space.
LIMENTE LED-INSER LUX is dimmable with wireless LIMENTE SMART 350 (No. 640350) and LIMENTE SMART 400-series 24 V dimmer (No. 640420) and wireless wall switches (No. 640411, 640421 and 640422, 640424). In both options, the dimmer is installed between the power supply and the luminaires and it includes a corresponding manifold as it is in the power supply. 6 pairs of LIMENTE luminaires can be connected to the dimmer, as long as the maximum load (W) of the power supply is not exceeded.
The LIMENTE LED-INSER LUX is fast and easy to mount with the supplied hardware.
The power supply cable (for example hidden behind the cabinet) is put in place so that the male connector comes close to the power supply and the female connector near the LED-INSER LUX profile. The light profile is cut to the desired length and fastened to its place with the supplied clips. The light strip is pressed onto the luminaire profile using 2-sided tape and finally the power supply cable is pressed against the light strip and the power supply. All electrical connections are made simply by quick connectors.
The power supply cable at both ends of the lamp enables the use of LED-INSER LUX as two separate luminaires. LED-INSER LUX can also be used in its full length (2 m or 4 m), whereby the power cord of the other end is cut off. LED-INSER LUX can be shortened at 3,3 cm intervals to the desired length. At both ends there is a standard 5 cm + 300 cm long cord. If this is not enough, you can order an (3 m) extension cord (No. 681588). Extension cables can be fitted with a maximum of 1 pcs of luminaires, with a maximum cable length of up to 6 m. Be aware of the adequate length of the cord and that the maximum load (W) on the power supply is not exceeded.
Ei liittyviä artikkeleita