LIMENTE LED-RIBBON 20 12 V, 4000 K, IP44 | 120 led/m, 1080 lm/m

Reference: 629284
Supplier reference: 4118875
RIBBON 20 4K IP44 120 led-strip

48,36 €9,50 €(7,66 € tax excl)

Product variations: Availability Add to brochure:
LIMENTE LED-RIBBON 20 In stock MyLimente

Versatile led-strip

A very effective work- and ambiance light, which can be cut to the length of your choosing. The led lights are spaced close to each other (120 led / meter) and together with LIMENTE LIGHT LIST it gives off a pleasant and uniform light.

Both ends of the ribbon have their own power supply, which allows the LED-RIBBON to be cut and still utilize both pieces. This way you avoid having unnecessary waste and can install the ribbon to the drive going in two different directions.

LED-RIBBON can be installed separately on a flat surface or inside a LED-LIGHT LIST. The list makes it possible to be installed for example underneath a drying cabinet. Its heat conductive feature helps in prolonging the operating life time of the product and thus we recommend the LED-RIBBON to always be installed together with the list.
In addition to being used as a working light in the kitchen, the LED-RIBBON can be utilized as an indirect light for example behind mirrors, sockets, furniture or ceilings. In general it can be placed anywhere, where you might want you lighting to be as inconspicuous as possible.
LIMENTE LED-RIBBON 12 V is available in two different lengths, 3000 K and 4000 K fixed color temperature.

Dimming and lighting control

The lamp can be dimmed by Limente Smart 400 12 V series dimmers. Dimmer is installed between the power source and the lamp and the controller. The dimmer contains a manifold which enables you to connect 6 LIMENTE-lamps to it. Note to choose a 12 V Smart 410 dimmer (nr. 640410).

The dimmers can be combined with wireless wall switches (nr. 640411, 640421 and 640422).


The LIMENTE LED-RIBBON tape is fast and easy to install.

The power supply cable, often hidden behind the cabinet, is put in place so that the male connector comes close to the power source and the female near the LED-RIBBON light strip. The light tape is pressed into the desired surface using 2-way tape and finally the power supply cable is pressed against the light strip and the power supply. All electrical connections are made simply by quick connectors.
The LED-RIBBON can be trimmed at 3,3 cm intervals and at both ends there is a power supply, so you can use both ends separately if wanted. LED-RIBBON should always be attached to heat-conductive material such as an optional LED-LIGHT LIST. This will ensure long lifetime of the LED-tape. The list also allows for installation under a drying cabinet, and its protective matt glass makes the light even more smooth. In all cases, make sure that the fastening surface is absolutely clean and dry before attaching the LED-strip.

Package contents

- led-ribbon, with in both ends driver

Technical data

Fixture color/finish
Light source
Installation method
Surface mounting
Recommended installation distance
Current supply
Top, hole Ø 8 mm
Light flux
1080 lm/m
86 lm/W
Color temperature
4000 K
Ra value
> 80
Input power
14 W
Enclosure class
12 V DC
Warranty months
Additional warranty months