Our webshop uses cookies and other technologies so that we can improve your experience on our sites.

LIMENTE LED-CORNER 4000 K, aluminium | 1080 lm/m, Ra>80

Reference: LEDCORNERB
Supplier reference:
LIMENTE LED-CORNER

95,48 €

Ref: Supplier ref: Product variations: Availability Add to brochure:
682330 4129647 LIMENTE LED-CORNER 20, 2 m, 4000 K, 24 V: In stock MyLimente 682331 4129648 LIMENTE LED-CORNER 40, 4 m, 4000 K, 24 V: In stock MyLimente LED27030 4009726 LIMENTE driver 30 W, 24 V: In stock MyLimente LED27050 4009727 LIMENTE driver 50 W, 24 V: In stock MyLimente LED27075 4009728 LIMENTE driver 75 W, 24 V: In stock MyLimente LED27100 4009729 LIMENTE driver 100 W, 24 V: In stock MyLimente

A versatile corner profile

LIMENTE LED-CORNER is a versatile work- and mood light that can be used under the kitchen cabinets, but also as an indirect light on top of cabinets, plinths, roofs, or inside a wardrobe and other spaces where light can be placed in a corner. Only your imagination is the limit! LIMENTE LED CORNER is available in standard lengths of 2 and 4 meters and can be shortened to the desired length at 3,3 cm intervals.


The light is stylishly continuous with no interrupting connection points, so that a uniform profile provides even light throughout the area. LIMENTE LED-CORNER comes with quality LEDs with a color rendering index of Ra> 80, an efficiency of 80 lm / W, a luminosity of 1080 lm / m and a color temperature of about 4000 K (small color temperature differences may vary by production).

LIMENTE LED CORNER profile light is available in three different versions. The standard model (Ra> 80, 4000 K), LUX (Ra> 95, 3000 K and 4000 K) and an adjustable CCT model (Ra> 80, 2700K - 6000K). A suitable 24 V power supply must be used with LIMENTE LED-CORNER. Suitable alternatives are mentioned in alongside with the products. NOTE! The power supply must be ordered separately.

Dimming and lighting control

By adjusting the lights, it is easy to create appropriate lighting for different occasions. By dimming LIMENTE LED-CORNER you can change your home’s lighting from efficient and bright to dim and cosy. You can use the same switch to adjust all the LIMENTE lights in the room, including various ceiling-, panel- and profile lights. The lamps adjust smoothly at the same time, while simultaneously changing the ambience of the space.

LIMENTE LED-CORNER is dimmable with wireless LIMENTE SMART 350 (No. 640350) and LIMENTE SMART 400-series 24 V dimmer (No. 640420) and wireless wall switches (No. 640411, 640421 and 640422, 640424). In both options, the dimmer is installed between the power supply and the luminaires and it includes a corresponding manifold as it is in the power supply. 6 pairs of LIMENTE luminaires can be connected to the dimmer, as long as the maximum load (W) of the power supply is not exceeded.

Assembly

The LIMENTE LED-CORNER is fast and easy to mount with the supplied hardware.

The power supply cable (for example hidden behind the cabinet) is put in place so that the male connector comes close to the power supply and the female connector near the LED-CORNER profile. The light profile is cut to the desired length and fastened to its place with the supplied clips. The light strip is pressed onto the luminaire profile using 2-sided tape and finally the power supply cable is pressed against the light strip and the power supply. All electrical connections are made simply by quick connectors.
The power supply cable at both ends of the lamp enables the use of LED-CORNER as two separate luminaires. LED-CORNER can also be used in its full length (2 m or 4 m), whereby the power cord of the other end is cut off. LED-CORNER can be shortened at 3,3 cm intervals to the desired length. At both ends there is a standard 5 cm + 300 cm long cord. If this is not enough, you can order an (3 m) extension cord (No. 681588). Extension cables can be fitted with a maximum of 1 pcs of luminaires, with a maximum cable length of up to 6 m. Be aware of the adequate length of the cord and that the maximum load (W) on the power supply is not exceeded.

Technical data

Light source
LED
Installation method
Surface mounting
Current supply connection
Europlug pistoke
Light flux
1080 lm/m
Efficiency
80 lm/W
Colour temperature
4000 K
Ra
> 80
Input power
14 W/m
Lifetime
30.000 h
Enclousure class
IP44
Voltage
25 V DC
Energy class
A+

Tuotteeseen liittyvät artikkelit

Ei liittyviä artikkeleita

See also these compatible sockets