RENO rechargeable doorlight | 130 lm, CRI>80

Reference: 66015
Supplier reference: 4129719
RENO al spotlight

39,68 €(32,00 € tax excl)

Product variations: Availability Add to brochure:
RENO In stock MyLimente

Rechargeable doorlight

LIMENTE RENO is a rechargeable light fixture designed to illuminate the insides of drawers or cabinets. RENO has a rechargeable battery, so no wiring is needed and the fixture is easy to install inside any type of a drawer, cabinet or cupboard. The fixture suits cabinets and cupboards as well as drawers in kitchens, in bedrooms, and anyplace, where the dark insides of cabinets and drawers need light.

The fixture attaches with a magnet and is easy to recharge with a USB portal.
LIMENTE RENO can be used for short-term lighting (when light is needed only separate, short spaces of time at a time) and as a cabinet light. When wanting short-time lighting, turn the fixture on and off with a wave of a hand. When using RENO as a cabinet light, the light turns on when the door is opened and turns off when the door is closed.

Dimming and lighting control

LIMENTE RENO has two different settings, which enable the use of the fixture both as a worktop light and a cabinet light.

A-setting activates the integrated ON/OFF switch of the fixture, which turns on the light when the door is opened. The light turns off when the door is closed. The light turns automatically off after two minutes, in case the door is not closed. The fixture is placed near the front end of the cabinet for the switch to recognize the door opening.
M-setting activates the integrated ON/OFF switch of the fixture, which turns on the light when waving a hand in front of the sensor. With a second wave of a hand, the light turns off. The light does not turn off automatically but is lit until it’s turned off or the battery runs out. The battery duration is maximum three hours.
LIMENTE RENO is not dimmable.

Installation

LIMENTE RENO can be placed anywhere without any limitations. Decide the amount of fixtures needed and install the installation plates with double-sided tape in place. Then attach the fixture with the magnet. No wiring or outside power is needed!

Place the fixture near the front end of the cabinet. If the fixture is too far from the door, the switch is not able to register the door opening.

Package contents

- rechargeable lamp- metal fasteners
- USB charging cable

Technical data

Fixture color
Alulook
Light source
LED
Installation
Surface mounting
Light flux
130 lm
Efficiency
44 lm/W
Color temperature
4000 K
Input power
3 W
Lifetime
35.000h (L80B10)
Enclosure class
IP20
Voltage
5 V DC
Warranty months
24
Pinch time
-

Related articles

See also these compatible sockets