LIMENTE LED-LENO 32 is a beautiful, traditional light fixture with an unobtrusive design. The light is wide-spread and pleasant, which makes LED-LENO 32 an excellent choice for a kitchen workspace, in showcases and on shelves. Due to its oblique outlines, the fixture appears even more graceful and petite, which makes it perfect in any space, where you do not want to draw any excess attention to light fixtures.
All LIMENTE LED-LENO fixtures use a new technique, which makes the light provided even and excellent in color temperature. This generates optimal light and is easy and pleasant on the eyes. Due to their amazing luminosity, the fixtures can be placed up to 60-80cm apart! When the fixtures are placed on both sides of the cooker hood, you are able to receive excellent lighting to your cooktop.
Appropriate lighting for any occasion is made easy with our dimming and lighting control system. You can easily change the lighting and ambience in your home from efficient and bright to dim and cosy by dimming your LIMENTE LED-LENO 32 with our wireless system. You can use the same switch to adjust all the LIMENTE lights in the room, including various ceiling, panel and profile lights. The light adjusts smoothly at the same time while creating ambience for working, entertaining or any mood in between.
LIMENTE LED-LENO 32 is dimmable either with LIMENTE SMART 350 dimmer (no. 640351) and a wireless wall switch (no. 640352) or with LIMENTE SMART 400 24V dimmer (no. 640420) and wireless wall switches (no. 640411, 640421 and 640422, 640424, 640425). LIMENTE SMART 425 is a remote control, which you can use to adjust lighting in your home but also to save two different preset lighting settings to change the mood with just a click of a button!
The dimmer is installed between the power supply and the fixture. The dimmer includes a similar manifold to the one included in the power supply. You can connect up to 6 LIMENTE lights to one dimmer, as long as the maximum load (W) of the power supply is not exceeded.
LIMENTE LED-LENO 32 is quick and easy to install. The fixture includes a separate attachment board, which is fastened in place with screws. Install the attachment board, connect the fixture to the power supply cable and rotate the fixture until it attaches to the attachment board.
The power supply cable is put in place (e.g. hidden behind a cabinet) so that the male connector comes close to the power supply and the female connector comes near the LEDLENO 32 fixture. The fixtures can be installed up to 60-80cm apart.
There is a 5cm + 300cm long power cord at the end of LED-LENO 32. An extension cord (3m, no. 681588) can be ordered, in case a longer power cord is needed. Extension cords can be fitted with a maximum on 1 pcs of fixtures, with a maximum cord length of up to 6m. Please note the adequate length of the cord and the maximum load (W) of the power supply.
All electrical connections are done with quick connectors.
Choose product from drop-down menu above and you can see it’s content here.
No related articles