LIMENTE SMART SENSOR wireless on/off-switch |

Wireless motion-responsive on/off- door switch

LIMENTE SMART wireless on/off-door switch is a compact and neat-looking switch that enables the lights behind the door to be switched on and off automatically. Thanks to its wireless and flexible placement options, the product is easy to use in all locations where you want the lights to turn on when you open the door, such as in breakfast or wardrobe cabinets, closets and interior doors.

LIMENTE SMART wireless on/off-door switch enables the door switch to be used, for example, in places where running wires is challenging, impossiple, or the wiring cannot be done neatly.

Adjusting the lights

When pairing the switch directly to the dimmer, it works as an on/off switch. In this case, the lights turn on at full power when the door is opened and turn off when the door is closed.

If you want to adjust the light, you can connect the SMART wireless on/off door switch to the LIMENTE APP. This allows you to control the light in various ways using the app. For example, you can set the light to always turn on at half power when the door is opened.

The LIMENTE APP can also be used to control all dimmers of the LIMENTE SMART CLASSIC, LUXUS and GREENLINE series, and thus all Limente lights connected to them. The LIMENTE APP is available for free download from the App Store (iOS) and Google Play (Android). No registration is required to use the app.

Installation

LIMENTE SMART wireless on/off-door switch is simple to install. You can do it yourself and it does not require a separate electrical installation.

The product comes with a double-sided sticker for attaching the door switch and the magnet. Remove the protective plastic from the sticker and attach the switch to the desired location. The door switch should be installed in the door frame and the magnet in the door. The distance between these two pieces should be no more than 10 mm when the door is closed. When the magnet comes close to the door switch, the dimmer can turn off the lights.

In the basic setup, the SMART wireless on/off door switch and the Limente dimmer are paired together, after which the switch is ready for use. If you need additional dimmers or door switches, they must also be paired with each other. Pairing allows the dimmer to detect the signal from the door switch. Pairing is a simple and quick process, which is described in the installation instructions.

To customize the lighting, you need to add the switch to the LIMENTE APP. This will allow you to control the light in various ways using the app.