LIMENTE PROFILE ECOLINE without led-strip | white 2,0 m

Aluminum profile for LED strips

NOTE Available to order from our sales service. Sold in batches of 50!

LIMENTE PROFILE ECOLINE is designed for installing LIMENTE PRO led strip. You can use the profile to install the led strip in a kitchen workspace or in a utility room. The profile has a standard length of 2 meters and can be shortened to a desired length using a hacksaw or a circular saw. When the profile is cut to a proper length, simply install the led strip inside. ECOLINE aluminum profile is available in batches of 50 in two colors: aluminum and white.

ECOLINE profile is easy to install. Use ECOLINE profile for a smooth installation and extend the lifetime of the led strip. Take your pick from the several different options of LIMENTE PRO (available in different lengths, different technical values and IP classifications) to suit your personal lighting design. N.B.! The led strip and power supply must be ordered separately.

Dimming and lighting control

Combine any LIMENTE PRO led strip with either LIMENTE SMART CLASSIC, LUXUS and GREENLINE series wireless dimming and lighting control system. With our SMART systems, you can easily change the lighting and ambience in your home from efficient and bright to dim and cozy with just a push of a button.

LIMENTE PRO led strips are dimmable either with LIMENTE SMART CLASSIC, LUXUS ja GREENLINE 24V dimmer (no. 640540) and wireless wall switches (no. 640541, 640542, 640544, 640546 and 640547). The dimmer is installed between the power supply and the fixture. The dimmer includes a similar manifold to the one included in the power supply. You can connect up to 6 LIMENTE lights to one dimmer, as long as the maximum load (W) of the power supply is not exceeded.

LIMENTE PRO led strips are is also dimmable with a Dali driver (LEDDALI100). The driver is controlled by either a 240 V Dali controller or a push button switch, utilizing the "Push Dim" function.

Installation

LIMENTE profiles are cut to a desired length using a hacksaw or a circular saw and secured in place with the supplied installation tools and attachment brackets. Use the additional profile to hide all wiring to make your lighting design complete!