LIMENTE LED-LINEA IP44 COM is a versatile light fixture suitable for either working light or mood light. The fixture can be used in kitchen workspace but also to provide indirect light when placed above upper cabinets, in plinths, in ceilings or inside a wardrobe or any other space, where light is needed.
See ”Installation pictures” for tips on how to use LED-LINEA IP44 COM as working light in a kitchen workspace but also as indirect light when placed above upper cabinets or inside a wardrobe! In kitchen workspaces the fixture is installed near the front edge of the kitchen upper cabinet. LIMENTE LED-LINEA profile fixtures are available in multiple lengths (2-6m) and three different color temperatures (3000K, 4000K and 2700K-6000K). The profile itself has a standard length of 2m and can be shortened to a desired length.
LIMENTE LED-LINEA IP44 COM is available in standard lengths of 2 and 4 meters. The fixture can be shortened to a desired length at 3,3 cm intervals. A range of accessories, such as corner pieces, give the installation a stylish look. LIMENTE LED-LINEA IP44 COM comes with high quality LEDs with a color rendering index of Ra> 85, an efficiency of 80 lm/W, a luminosity of 1080lm/m and a color temperature of about 4000K (minor color temperature differences may occur in different production batches). The fixture includes a matte protective diffuser cover, which makes the light even and continuous. The diffuser makes the light a bit warmer in light color. All technical values are given to the led strip without a diffuser.
In addition to LIMENTE LED-LINEA IP44 COM, LIMENTE LED-LINEA is available in two different versions: the LUX collection version LIMENTE LED- LINEA IP44 LUX (IP44, Ra>90, 3000K and 4000K) and the color temperature adjustable CCT version LIMENTE LED- LINEA IP44 CCT (IP44, Ra>80, 2700K-6000K).
To use LIMENTE LED- LINEA, you’ll need a suitable 24V power supply. Compatible products are mentioned alongside the product. The profile, the led strip and the power supply are also sold separately. N.B.! The power supply must be ordered separately.
Suitable lighting for any occasion is made easy with our dimming and lighting control system. You can easily change the lighting and ambience in your home from efficient and bright to dim and cozy by dimming your LIMENTE LED-LINEA IP44 COM with our wireless system. You can use the same switch to adjust all the LIMENTE lights in the room, including various ceiling, panel and profile lights. The light adjusts smoothly at the same time while creating ambience for working, entertaining or any mood in between.
LIMENTE LIMENTE LED-LINEA IP44 COM is dimmable either with LIMENTE SMART 350 dimmer (no. 640351) and a wireless wall switch (no. 640352) or with LIMENTE SMART 400 24V dimmer (no. 640420) and wireless wall switches (no. 640411, 640421 and 640422, 640424, 640425). LIMENTE SMART 425 is a remote control, which you can use to adjust lighting in your home but also to save two different preset lighting settings to change the mood with just a click of a button!
The dimmer is installed between the power supply and the fixture. The dimmer includes a similar manifold to the one included in the power supply. You can connect up to 6 LIMENTE lights to one dimmer, as long as the maximum load (W) of the power supply is not exceeded.
LIMENTE LED-LINEA IP44 COM is fast and easy to install with the installation parts included.
The power supply cable is put in place (e.g. hidden behind a cabinet) so that the male connector comes close to the power supply and the female connector comes near the LED-LINEA profile. A power supply cable at both ends of the fixture enables LIMENTE LED-LINEA IP44 COM to be used as two separate lights. The fixture can be shortened to a desired length at 3,3 cm intervals. There is a 5cm + 300cm long power cord at each end of the fixture. An extension cord (3m, no. 681588) can be ordered, in case a longer power cord is needed. Extension cords can be fitted with a maximum on 1 pcs of fixtures, with a maximum cord length of up to 6m. Please note the adequate length of the cord and the maximum load (W) of the power supply.
LED-LINEA IP44 COM can also be used in its full length (2 or 4 m). When using the full lenght, simply cut off the power supply cable at the other end.
When installing, cut the profile into the desired length and attach in place with the installation parts and clips included. Remove the double-sided tape from the light strip and press onto the profile. Then connect the power supply cable to the light strip and to the power supply. All electrical connections are done with plug & socket connectors.