LIMENTE RIBBON DOB 24 V, 3000K/4000K, IP44 | 288 led/m, 1300 lm/m, CRI>90

Reference: RIBBONDOB
Supplier reference:
RIBBON-DOB 3000K/4000K

48,95 €(39,00 € tax excl)

Ref: Supplier ref: Product variations: Availability Add to brochure:
628880 4158001 RIBBON-DOB IP44, 2,0m, 3000K: Not in stock MyLimente 628881 4158002 RIBBON-DOB IP44, 3,0m, 3000K: Not in stock MyLimente 628882 4158003 RIBBON-DOB IP44, 4,0m, 3000K: Not in stock MyLimente 628883 4158004 RIBBON-DOB IP44, 2,0m, 4000K: Not in stock MyLimente 628884 4158005 RIBBON-DOB IP44, 3,0m, 4000K: Not in stock MyLimente 628885 4158006 RIBBON-DOB IP44, 4,0m, 4000K: Not in stock MyLimente

Multifunctional and completely dot-free IP44 LED strip

The LIMENTE RIBBON IP44 DOB 8 mm LED strip is part of the LIMENTE RIBBON product family. The new DOB technology provides a completely dot-free light, which can be used in a profile even without a diffuser if desired. The RIBBON IP44 DOB is an efficient, trimmable LED strip with very closely spaced LEDs (288 LEDs / meter). In addition to kitchen task lighting, the strip is used as indirect lighting, for example, behind mirrors, in plinths, in furniture, in ceilings, and anywhere where the light source needs to be very discreet.


The standard lengths for LIMENTE RIBBON DOB are 2, 3, and 4 meters. The LED strip can be shortened to the desired length approximately every 3 cm, allowing for various customized solutions. The DOB model uses only the best components as standard, offering excellent efficiency, nearly perfect colour rendering (the colours of the illuminated object appear as natural as possible), and a colour temperature of either 3000K or 4000K.

The LED strip comes standard with a fixed 5 cm wire and a separate 300 cm wire at both ends. If this is not sufficient, you can order an extension cord (3 m), product number 681588. A maximum of one extension cord can be connected per luminaire wire, which allows for a maximum wire length of up to 6 meters. The power supply wire at both ends allows the RIBBON to be used in two parts if needed. This way, you avoid unnecessary waste and can install the strip in two different directions from the power supply. The RIBBON strip must be used with a suitable 24 V power supply. The suitable options are listed with the products.

Dimming and lightcontrol

A stepless dimmer makes it easy to create atmosphere and a new look for a space. By dimming LIMENTE lights, you can change your home's lighting from bright and efficient to dim and cozy. If you wish, you can use the same dimmer to control all LIMENTE lights in the room, including various ceiling, panel, and under-cabinet lights. The lights dim smoothly and pleasantly, changing the feel of the entire space.


LIMENTE RIBBON IP44 DOB is dimmable either with LIMENTE SMART CLASSIC, LUXUS ja GREENLINE series 24V dimmer (no. 640540) and wireless wall switches (no. 640541, 640542, 640543, 640544, 640546 and 640547). The dimmer is installed between the power supply and the fixture. The dimmer includes a similar manifold to the one included in the power supply. You can connect up to 6 LIMENTE lights to one dimmer, as long as the maximum load (W) of the power supply is not exceeded. Read more about dimming in PRODUCTS - LIGHT CONTROL

LIMENTE RIBBON IP44 DOB is also dimmable with a Dali driver (LEDDALI100). The driver is controlled by either a 240 V Dali controller or a push button switch, utilizing the "Push Dim" function.

Installation

Installation of the LIMENTE RIBBON IP44 DOB strip is quick and easy. The power supply cord, which is often hidden behind a cabinet, for example, is placed in position so that the male connector is close to the power supply and the female connector is close to the RIBBON DOB LED strip. The protective film is removed from the strip's tape, and the strip is pressed into the installation location. Finally, the power supply cord is connected to the LED strip and the power supply with quick connectors.


The RIBBON DOB can be shortened every 3 cm and has power leads at both ends, meaning you can use both ends separately if needed. The RIBBON DOB must always be attached to a heat-conducting material, such as the aluminum profile available as an accessory. This ensures that the LED strip achieves its promised lifespan. In all cases, make sure the mounting surface is absolutely clean and dry before you attach the LED strip.

Package contents

- led-ribbon, with connectors at both ends
- 2 x 3m power cord with TOP connector

Technical data

kg CO2e
13.74
Light source
LED
Installation
Surface mounting
Current supply
Top, hole Ø 8 mm
Light flux
1300 lm/m
Efficiency
144 lm/W
CRI value
> 90
Input power
18/27/36 W
Elinikä (L80B10)
54.000h
Elinikä (L70B50)
102.000h
Energy class
E
Enclosure class
IP44
Voltage
24 V DC
Warranty months
24
Additional warranty months
36

See also these compatible products

See also these compatible sockets