LIMENTE CORNER DOB 3000/4000 K, IP44, aluminium | 288 led/m, 1300 lm/m, CRI>90

A versatile corner profile with completely dot-free LED strip

LIMENTE CORNER IP44 DOB is a versatile light fixture suitable for either working light or mood light. The fixture can be used in any space, where the fixture can be placed in a corner. The light is stylish and continuous with no connection points interrupting the light, which provides even light throughout the area. The new DOB technology provides a completely dot-free light, which can be used in a profile even without a diffuser if desired.

See ”Installation pictures” for tips on how to use CORNER in a kitchen workspace but also to provide indirect lighting when placed above upper cabinets, in plinths, in ceilings or inside a wardrobe. LIMENTE CORNER profiles are available in three amazing colors (aluminum, black, white), in multiple lengths (2-4m) and three different color temperatures (3000K, 4000K and 2700K-6000K). The profile itself has a standard length of 2m and can be shortened to a desired length.

LIMENTE CORNER IP44 DOB is available in standard lengths of 2 and 4 meters. The fixture can be shortened to a desired length at 3 cm intervals. The luminaire features high-quality LEDs with a color rendering index of CRI>90, a color temperature of either 3000K or 4000K, an efficiency of 144 lm/W, and a luminous flux of 1300 lm/m (slight variations in color temperature may occur between production batches). All technical values are given to the led strip without a diffuser.

To use LIMENTE CORNER IP44 DOB, you’ll need a suitable 24V power supply. Compatible products are mentioned alongside the product. The profile, the led strip and the power supply are also sold separately. N.B.! The power supply must be ordered separately.

Dimming and lightcontrol

A stepless dimmer makes it easy to create atmosphere and a new look for a space. By dimming LIMENTE lights, you can change your home's lighting from bright and efficient to dim and cozy. If you wish, you can use the same dimmer to control all LIMENTE lights in the room, including various ceiling, panel, and under-cabinet lights. The lights dim smoothly and pleasantly, changing the feel of the entire space.

LIMENTE RIBBON IP44 DOB is dimmable either with LIMENTE SMART CLASSIC, LUXUS ja GREENLINE series 24V dimmer (no. 640540) and wireless wall switches (no. 640541, 640542, 640543, 640544, 640546 and 640547). The dimmer is installed between the power supply and the fixture. The dimmer includes a similar manifold to the one included in the power supply. You can connect up to 6 LIMENTE lights to one dimmer, as long as the maximum load (W) of the power supply is not exceeded. Read more about dimming in PRODUCTS - LIGHT CONTROL

LIMENTE RIBBON IP44 DOB is also dimmable with a Dali driver (LEDDALI100). The driver is controlled by either a 240 V Dali controller or a push button switch, utilizing the "Push Dim" function.

Installation

LIMENTE CORNER IP44 DOB is fast and easy to install with the installation tools included. The power supply cable is put in place (e.g. hidden behind a cabinet) so that the male connector comes close to the power supply and the female connector comes near the CORNER profile. A power supply cable at both ends of the fixture enables CORNER IP44 DOB to be used as two separate lights. The fixture can be shortened to a desired length at 3 cm intervals. There is a 5cm + 300cm long power cord at each end of the fixture. An extension cord (3m, no. 681588) can be ordered, in case a longer power cord is needed. Extension cords can be fitted with a maximum on 1 pcs of fixtures, with a maximum cord length of up to 6m. Please note the adequate length of the cord and the maximum load (W) of the power supply.

CORNER IP44 DOB can also be used in its full length (2 or 4 m). When wanting to use the whole length, simply cut off the power supply cable at the other end.

When installing, cut the profile into the desired length and attach in place with the installation tools and clips included. Remove the double-sided tape from the light strip and press onto the profile. Finally, connect the power supply cable to the light strip and to the power supply. All electrical connections are done with quick connectors.