Breakfast cabinet SET Corner CORNER 4m with door sensor | 4000K, Ra>85, white

Breakfast cabinet SET Corner 4m

Installation and maintenance instructions

Installation instructions

Measurements

Assembly pictures

Reference: 96303
Supplier reference: 4143108
Breakfast cabinet SET Corner 4m

354,64 €(286,00 € tax excl)

Product variations: Availability Add to brochure:
Breakfast cabinet SET Corner In stock MyLimente

Versatile corner profile with door sensor to breakfast cabinet

LIMENTE CORNER IP44 is a versatile light fixture suitable for either working light or mood light. The fixture can be used in breakfast cabinets, where the fixture can be placed on the leading edge. The light is stylish and continuous with no connection points interrupting the light, which provides even light throughout the area.


The fixture can be shortened to a desired length at 3,3 cm intervals. LIMENTE CORNER IP44 comes with quality LEDs with a color rendering index of Ra> 85, an efficiency of 126 lm/W, a luminosity of 1512 lm/m and a color temperature of about 4000K (small color temperature differences may vary by production batches). The fixture includes a matte protective glass diffuser, which makes the light even and continuous and makes the light a bit warmer in light color. All technical values are given to the led strip without a diffuser.

LIMENTE 100-series is designed to automate lighting control in all home spaces. Automated control of lighting is at its best when the lights are on when they are needed and where they are needed without the user needing to pay much attention. Unnecessary use of lights and electricity consumption are reduced as security increases. Automatic lighting control makes your breakfast cabinet lighting a new kind of comfort and safety product, and at the same time it is also an ecological way to use lights.

Lighting control

LIMENTE SMART IR-sensor works as an automated ON/OFF –switch.


The Smart IR-door switch is installed near either a sliding or swinging door and whenever the door is opened, the lights inside of the cabinet light up. The detectors can be up to four pieces in one system.

Easy Installation

LIMENTE CORNER IP44 is fast and easy to install with the installation accessories included.


The power supply cable is put in place (e.g. hidden behind a cabinet) so that the male connector comes close to the power supply and the female connector comes near the CORNER profile. A power supply cable at both ends of the fixture enables CORNER IP44 to be used as two separate lights. The fixture can be shortened to a desired length at 3,3 cm intervals. There is a 5cm + 300cm long power cord at each end of the fixture. An extension cord (3m, no. 681588) can be ordered, in case a longer power cord is needed. Extension cords can be fitted with a maximum on 1 pcs of fixtures, with a maximum cord length of up to 6m. Please note the adequate length of the cord and the maximum load (W) of the power supply.

CORNER IP44 can also be used in its full length (2 or 4 m). When wanting to use the whole length, simply cut off the power supply cable at the other end.

When installing, cut the profile into the desired length and attach in place with the installation tools and clips included. Remove the double-sided tape from the light strip and press onto the profile. Finally, connect the power supply cable to the light strip and to the power supply. All electrical connections are done with quick connectors.

The LIMENTE SMART SENSOR series electronics unit and sensor are simple and quick to install and do not require separate electrical installations. First, select the desired operating mode on the electronics unit so that the sensors work the way you want them to.

The compact electronics unit has female and male connectors. The male connector is pressed into the power supply and the female connectors are connected to the LEDs on the LED side. You can connect a maximum of four 24V lights to one system. IR sensors are installed on the SENSOR side. You can do the installation yourself as no electrician is needed.

The sensor is placed behind the door so that when opened, the door goes away from the front of the sensor.

A maximum of 4 sensors can be connected to the electronics unit. All connections are made using easy plug and socket connectors. When connecting lights to the LIMENTE SMART SENSOR, make sure that their total maximum load does not exceed 96 W.

Package contents

- 2 x 2m aluminumprofile white
- 4m ledstrip
- 2 x cord 3m
- driver 60W
- 2 x Smart 512 door sensor

Technical data

Fixture color
White
Light source
LED
Led / m
180
Light flux
1512 lm/m
Efficiency
126 lm/W
Input power
48 W
Lifetime
84.000h​ (L70B50)
Lifetime
36.000h (L80B10)
Enclosure class
IP44/IP20
Warranty months
24
Additional warranty months
12

Related articles

No related articles