LIMENTE LED-LILO is a profile fixture for indirect lighting, which is especially pleasant when planning on illuminating via another surface. The fixture can be used e.g. in closets, when wanting to direct light toward the back wall of the closet. LED-LILO is a surface-mounted profile fixture. The profile is very small in size and, unlike other LIMENTE-profiles, LED-LILA and LED-LILO use an 8mm led strip.
LED-LILO is a versatile fixture for working light and mood light. The fixture can be shortened to a desired length. The light is stylish and continuous with no connection points interrupting the light, which provides even light throughout the area.
See ”Installation pictures” for tips on how to use LED-LILO in a kitchen workspace but also to provide indirect lighting when placed above upper cabinets or inside a wardrobe! LIMENTE LED-LILO is available in two different color temperatures (3000K and 4000K). The profile itself has a standard length of 2m and can be shortened to a desired length.
LIMENTE LED-LILO is available in standard lengths of 2 and 4 meters. The fixture can be shortened to a desired length at about 5 cm intervals. LIMENTE LED-LILO comes with quality LEDs with a color rendering index of Ra> 80, an efficiency of 130 lm/W, a luminosity of 1300lm/m and a color temperature of about 3000K or 4000K. The fixture includes a matte protective glass diffuser, which makes the light even and continuous and makes the light a bit warmer in color temperature. All technical values are given to the led strip without a diffuser.
Due to the excellent technical values, LED-LILO is granted with a three-year additional warranty in addition to our two-year warranty granted for all our products.
To use LIMENTE LED-LILO, you’ll need a suitable 24V power supply. Compatible products are mentioned alongside the product. The profile, the led strip and the power supply are also sold separately. N.B.! The power supply must be ordered separately.
Appropriate lighting for any occasion is made easy with our dimming and lighting control system. You can easily change the lighting and ambience in your home from efficient and bright to dim and cozy by dimming your LIMENTE LED-LILO with our wireless system. You can use the same switch to adjust all the LIMENTE lights in the room, including various ceiling, panel and profile lights. The light adjusts smoothly at the same time while creating ambience for working, entertaining or any mood in between.
LIMENTE LED-LILO is dimmable either with LIMENTE SMART 350 dimmer (no. 640351) and a wireless wall switch (no. 640352) or with LIMENTE SMART 400 24V dimmer (no. 640420) and wireless wall switches (no. 640411, 640421 and 640422, 640424, 640425). LIMENTE SMART 425 is a remote control, which you can use to adjust lighting in your home but also to save two different preset lighting settings to change the mood with just a click of a button!
The dimmer is installed between the power supply and the fixture. The dimmer includes a similar manifold to the one included in the power supply. You can connect up to 6 LIMENTE lights to one dimmer, as long as the maximum load (W) of the power supply is not exceeded.
LIMENTE LED-LILO is fast and easy to install with the installation tools included.
The power supply cable is put in place (e.g. hidden behind a cabinet) so that the male connector comes close to the power supply and the female connector comes near the LED-LILO profile. A power supply cable at both ends of the fixture enables LED-LILO to be used as two separate lights. The fixture can be shortened to a desired length at about 5 cm intervals. There is a 5cm + 300cm long power cord at each end of the fixture. An extension cord (3m, no. 681588) can be ordered, in case a longer power cord is needed. Extension cords can be fitted with a maximum on 1 pcs of fixtures, with a maximum cord length of up to 6m. Please note the adequate length of the cord and the maximum load (W) of the power supply.
LED-LILO can also be used in its full length (2 or 4 m). When wanting to use the whole length, simply cut off the power supply cable at the other end.
When installing, cut the profile into the desired length and attach in place with the installation tools and clips included. Remove the double-sided tape from the light strip and press onto the profile. Finally, connect the power supply cable to the light strip and to the power supply. All electrical connections are done with quick connectors.