LIMENTE LED-LINEA 2700-6000 K, aluminium | 800 lm/m, Ra>80

A profile light with color temperature adjustment

LIMENTE LED-LINEA CCT is part of the LIMENTE CCT collection. In addition to dimming, you can also adjust the color temperature of the light. By adjusting the color temperature, you can easily change the feel of the room. LIMENTE LED-LINEA CCT is a versatile work- and mood light that can be used not only as a kitchen lighting, but as an indirect light above upper cabinets, in plinths or ceilings. LIMENTE LED-LINEA CCT is available in standard lengths of 2 and 4 meters and can be shortened to the desired length at 3.3 cm intervals. The light is stylishly continuous with no light interrupting connection points so that a uniform profile provides even light throughout the area. A range of accessories, such as corner pieces, gives the installation stylish look.

High quality LEDs with a color rendering index of Ra> 80, an efficiency of 80 lm / W, a light output of 800 lm / m and a color temperature of 2700 - 6000 K are used as standard in the CCT-series. LIMENTE LED-LINEA CCT must be equipped with a suitable 24 V power supply. See the correct product from the accessories part. NOTE! The power supply must be ordered separately.

LED-LINEA CCT has 2- or 4-meter-long rails with all the needed accessories (corner-, end- and extension parts and clips), light strip and 100 cm profile for the power supply cable. NOTE! The power supply must be ordered separately. The light strip can be used in its full length, whereby the power cord of the other end is cut off. The power supply cord at both ends of the luminaire allows the light to be used as two separate lights.

LIMENTE LED CORNER profile light is available in three different versions. The standard model (Ra> 80, 4000 K), LUX (Ra> 95, 3000 K and 4000 K) and an adjustable CCT model (Ra> 80, 2700K - 6000K).

Dimming and lighting control

By adjusting the lights, it is easy to create appropriate lighting for different occasions. By dimming LIMENTE LED-LINEA CCT you can change your home’s lighting from efficient and bright to dim and cosy. You can use the same switch to adjust all the LIMENTE lights in the room, including various ceiling-, panel- and profile lights. The lamps adjust smoothly at the same time, while simultaneously changing the ambience of the space.

In order to function, LIMENTE LED-LINEA CCT requires SMART series light control. LIMENTE LED-LINEA CCT is dimmable with wireless LIMENTE SMART 430 dimmer (No. 640430) and wireless wall switch (No. 640434). The dimmer is installed between the power supply and the luminaires and it includes a corresponding manifold as it is in the power supply. 6 pairs of LIMENTE luminaires can be connected to the dimmer, as long as the maximum load (W) of the power supply is not exceeded.

Assembly

The LIMENTE LED-LINEA CCT is fast and easy to mount with the supplied hardware.

The power supply cable (for example hidden behind the cabinet) is put in place so that the male connector comes close to the power supply and the female connector near the LED-LINEA profile. The light profile is cut to the desired length and fastened to its place with the supplied clips. The light strip is pressed onto the luminaire profile using 2-sided tape and finally the power supply cable is pressed against the light strip and the power supply. All electrical connections are made simply by quick connectors.

The power supply cable at both ends of the lamp enables the use of LED-LINEA CCT as two separate luminaires. LED- LINEA CCT can also be used in its full length (2 m or 4 m), whereby the power cord of the other end is cut off. LED- LINEA CCT can be shortened at 3,3 cm intervals to the desired length. At both ends there is a standard 5 cm + 300 cm long cord. If this is not enough, you can order an (3 m) extension cord (No. 681588). Extension cables can be fitted with a maximum of 1 pcs of luminaires, with a maximum cable length of up to 6 m. Be aware of the adequate length of the cord and that the maximum load (W) on the power supply is not exceeded.